User Guide

No.

B04(20)

Voice Name

OEns: SlowStrs

EL1: SlowStrs EL2: -

EL3: - EL4: -

Comment

Analog synth pad with slow attack

Notes

Scene (Foot) Initial Scene No. = 2 1 No fundamental 2 Normal 3 Modulation

Element1 Element2 Element3 Element4

Param1 (MW1) VibDepth - - - Vibrato depth

Param2 (MW2) Stiffness1 - - - Fine brightness control

Param3 (FC1) HarmVol - - - Coarser brightness control

Param4 (FC2) Stiffness2 - - - Basic change in harmonic structure

Param5 (MBx) ----

Param6 (MBy) ----

Param7 (CS1) Spectrum - - - Higher harmonics

Param8 (CS2) Squeak - - - Continuous movement produces flanging effect

Param9 (BC) ----

Param10(VEL) Stress - - - Stress

Param11(AT) ----

Param12(PB) ----

Param13(TEG) ----

Sustain Enable OFF - - -

Portamento OFF - - -

Max Notes 16 - - -

Microtuning Equal_(off) - - -

Effect Type Reverb Hall

Synth string with slow attack. Try adjusting the Quick Edit EG parameters.

Continuous sliding of CS2 and MW2 produces a flanging modulation effect. (The CS2 effect is more obvious.)

The CS1 spectral effect is obtained by phase change rather than by low-pass filter.

Most controller movements leave the essential sound intact. But try depressing FC2 all the way and then sliding

CS2 continuously to get the sound of gas from a pipe. Then hold this sound with the sustain pedal while operating

Performance various controllers.

Hints