User Guide

B
10
No.
B10(26)
Voice Name
Brs : OctBrs
EL1: lite brs EL2: lite brs2
EL3: - EL4: -
Comment
Gentle brass with eight-note polyphony sound
Notes
Scene (Foot) Initial Scene No. = 2 1 Mild brass 2 Normal 3 Modulating
Element1 Element2 Element3 Element4
Param1 (MW1) VibDepth VibDepth - - Vibrato
Param2 (MW2) Stiffness BrsMute - - Changes overall harmonics
Param3 (FC1) HarmPosit HarmPosit - - Changes overall harmonics
Param4 (FC2) HarmVol HarmVol - - Changes fundamental component (in conjunction with FC1)
Param5 (MBx) ----
Param6 (MBy) ----
Param7 (CS1) - Stiffness - - Changes inharmonic overtones
Param8 (CS2) - Wah - - Resonance
Param9 (BC) ----
Param10(VEL) Stress Stress - - Stress
Param11(AT) ----
Param12(PB) ----
Param13(TEG) ----
Sustain Enable OFF OFF - -
Portamento OFF OFF - -
Max Notes 8 8 - -
Microtuning Equal_(off) Equal_(off) - -
Effect Type Reverb Hall
Gentle brass sound. Probably not suited for rock performance.
The controllers have relatively mild effects on this voice, and do not change its fundamental image.
If you'd like more emphasis on filtering, raise CS2 slightly to add some resonance.
The Quick Edit EG parameters can produce some interesting effects. Raising EG SUSTAIN above its midpoint
causes filtering to be applied are then gradually released, producing a continually varying timbre. But setting
Performance EG DECAY all the way down at the same time will eliminate the timbre change, resulting in a strings padding sound.
Hints