User Manual

11
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
Installing on a wall or ceiling
2-2
Attach the safety wire to the speaker.
Attach the safety wire so that its clasp fits inside the groove on
the speaker.
3
Connecting the cables
3-1
Use a Phillips screwdriver to loosen the screws on the barrier
strip, insert the cables, and then tighten the screws. For
information about connecting the cables, refer to "Connections"
on page 6. Make sure the cables are secure and cannot be
pulled out.
4
Secure the speaker to the mounting bracket
4-1
Remove the grille.
4-2
Attach the speaker so that the
r
mark on the mounting bracket
is facing the
r
mark on the speaker.
r
mark