User Manual

14
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
Installing in a ceiling (using the CMA3S)
3
Attach the ceiling mount adaptor to the speaker.
3-1
Remove the grille.
3-2
Insert the speaker into the ceiling mount adaptor, and secure the
speaker using the supplied four screws.
4
Attach the safety wire
4-1
Refer to Step 2 on page 10.
Use the safety wire included with the CMA3S.
5
Connecting the cables
5-1
Feed the cables through the hole in the ceiling.
5-2
Run the cables through the terminal cover.
5-3
Use a Phillips screwdriver to loosen the screws on the barrier
strip, insert the cables, and then tighten the screws. For
information about connecting the cables, refer to "Connections"
(page 6). Make sure the cables are secure and cannot be
pulled out.
5-4
Tighten the screws and attach the terminal cover.