User Manual

7
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
Connections
Connecting satellites
This product features built-in output terminals for connecting satellite
speakers. You can connect full-range speakers to the satellite terminals
and use them as mid and high-range speakers.
NOTICE
• We recommend the use of 2 or 4 satellite speakers.
• Use caution when mixing 2- and 4-speaker satellite systems, as there may be
differences in volume.

VXS3S+VXS1ML (×4) low impedance connection
This is a basic system.
＋
－
＋
－
＋
－
＋
－
＋
－
Power amplifier
INPUT
INPUT
ST1 ST2
ST3 ST4

VXS3S+VXS1ML (×2) low impedance connection
Connect the speakers as shown below when using only 2 satellite
speakers.
＋
－
＋
－
＋
－
Power amplifier
INPUT
INPUT
ST1
ST2
NOTICE
When connecting satellites at low impedance, the combined impedance is 4
Ω
(when
connecting 4 satellites) or 3.5
Ω
(when connecting 2 satellites).
Make sure than the power amplifier is compatible with these impedances. If the power
amplifier is not compatible, the power amplifier may malfunction.