User Manual

③ [CUE] button
Outputs the audio signal to the channel that is set in “Settings” → “Hardware” → “Monitor”. The [CUE]
button cannot be turned on for multiple racks at the same time.
④ Output gain
Adjusts the output gain. Drag to change the gain value.
⑤ Output gain value
Shows the output gain value. Double-click to enter a value.
⑥ Latency group
Shows the name of the latency group. Click and then select a latency group from the list that is displayed.
⑦ Latency value
Shows the latency for the rack.
Right-click to switch the units between samples and milliseconds.
Context Menu
Right-click on a rack (anywhere other than a plug-in slot) to display a context menu. Click the desired operation in
the menu.
Setting Description
Clear Rack Removes all plug-in slot assignments.
Copy Rack to Copies everything except the input channel settings, output channel settings,
and CUE settings.
Move Rack to Moves the rack being manipulated to the position in front of the rack that is
selected in the displayed list. If [Last] is selected, it is moved to the end.
Pair (Unpair) Switches between pairing/unpairing with the rack immediately to the right. The
settings for the rack on the left side of a pair are applied to both racks.
NOTICE
The settings for the rack on the right side of a pair are not restored if the racks
are unpaired.
Reassign In/Out Assigns the channels in order from the beginning.

You can also move racks by dragging them left and right.
MAIN Window
10 | VST Rack Pro User’s Guide