Service manual

PAGE 5 of 20
13. Remove the exhaust chamber assembly as
shown in the illustration.
NOTE: To remove the bolt from the exhaust cham-
ber assembly, use a socket with an overall length of
65mm (2.6 in).
14. Remove the gasket.
To protect the exhaust manifold from dust or
foreign objects, cover it with a clean cloth.
Intake Silencer Removal
1. Loosen the 2 intake silencer pipe screw clamps
and remove the intake silencer pipe.
2. Remove the plastic tie from above the intake
duct and place the fuel hose aside. Then, loos-
en the intake duct retaining bolt and pull out the
intake duct upward.
CAUTION:
65mm (2.6 in) SOCKET