Service manual

PAGE 7 of 20
4. Remove the steering pad.
5. Disconnect the throttle cable from the throttle
lever.
6. From the inside of the watercraft, remove the
plastic tie of the grommet on the inside the
watercraft.
7. Pull up the 2 QSTS cables from the handlebar
side of the grommet.
NOTE: Pull out the QSTS cables until their
sponge portions are out of the grommet.
8. From the inside of the watercraft, pull the throt-
tle cable and take it out of the grommet on the
inside of the watercraft.