User Manual

VXL1-16P Remote Control Protocol Specications Version 1.0.0 rev1

3. Command Specications

2-10) Normalized value parameter setting

VXL1-16P

Command Option 1 Option 2 Option 3 Option 4 Description

setn AccessID X Y (value) Normalized value parameter setting

Details: AccessID = See section 7, "Parameter List."

X = See section 7, "Parameter List."

Y = See section 7, "Parameter List."

(value) = See section 3.1, "Basic Command Specications," or section 7, "Parameter List."

* When value is set "1023" (default:1000), control resolution becomes same as "Raw value"

command.

See "6.1 Fader parameter " for the "Nomalised value" vs "Raw value"

Response

Response string Description

OK setn AccessId X Y (value) "(string)" Normalized value parameter setting response

OKm setn AccessId X Y (value) "(string)"

* If the requested parameter value is outside the range, the value is adjusted within the range and set.

If this occurs, the result notication will be OKm instead of OK.

Details: AccessID = See section 7, "Parameter List."

X = See section 7, "Parameter List."

Y = See section 7, "Parameter List."

(value) = See section 3.1, "Basic Command Specications," or section 7, "Parameter List."

"(string)" = See section 3.1, "Basic Command Specications," or section 7, "Parameter List."

Example: Command: setn VXL:Ch/InputVolume/Level 0 0 408

Response: OK setn VXL:Ch/InputVolume/Level 408 "-31.50"

Meaning: Set the 1ch level of the Input Volume Conference to a normalized value of 408.

The 1ch level of the Input Volume Conference was set to "-31.50".

3.3.5. Meter control

2-11) Transmission request

VXL1-16P

Command Option 1 Option 2 Description

mtrstart MeterId (interval) Requests that the specied meter data be transmitted

Details: MeterId = See section 8, "Meter List."

(interval) = Minimum transmission interval (msec)

Response

Response string Description

OK mtrstart MeterId Meter data transmission setting complete

Details: MeterId = See section 8, "Meter List."

Example: Command: mtrstart AMP:DigitalIn/Level 1000

Notication: OK mtrstart AMP:DigitalIn/Level

NOTIFY mtr AMP:DigitalIn/Level 71 68

* The meter value is expressed using a 2-digit hexadecimal.

Meaning: Send the meter data of ch1 to 2 Digital Input Levels at 1000 msec intervals.

A request for the ch1 to 2 Digital Input Levels was received, so the data will be transmitted.