User Manual

VXL1-16P Remote Control Protocol Specications Version 1.0.0 rev1
6
2. Command List
2.1. Commands from a device sent to a remote controller
No. Notication details Reply from device Remarks
1-1 Device status change
notication
Device run mode notication NOTIFY devstatus runmode…
1-2 Device error status notication NOTIFY devstatus error…
1-3 Parameter change
notication
Parameter change notication raw value NOTIFY set…
Parameter change notication normalized
value
NOTIFY setn…
1-4 Meter information
notication
Meter information notication NOTIFY mtr…
1-5 Event processing
change notication
Device identify notication NOTIFY set AMP:Identied…
1-6 Alert notication NOTIFY event AMP:Alert…
2.2. Commands for controlling a device
No. Notication details Reply from device Remarks
2-1 Device status query Device run mode query devstatus runmode
2-2 Device error status query devstatus error
2-3 VXL1-16P external
control protocol run
mode setting
Result and change notication character
encoding setting
scpmode encoding…
2-4 Value notication mode setting scpmode valuetype…
2-5 Normalization resolution setting scpmode resolution…
2-6 Keep alive activation setting scpmode keepalive…
2-7 Parameter query Raw value parameter query get…
2-8 Normalized value parameter query getn…
2-9 Parameter setting Raw value parameter setting set…
2-10 Normalized value parameter setting (*) setn…
2-11 Meter control Transmission request mtrstart…
2-12 Stop request mtrstop…
* When value is set "1023" (default:1000), control resolution becomes same as "Raw value" command.
See "6.1. Fader parameter" for the "Nomalised value" vs "Raw value" when the value is set "1023"
2.3. Extended commands
No. Notication details Reply from device Remarks
3-1 Product information
query request
VXL1-16P external control protocol version
query
devinfo protocolver…
3-2 Parameter set version query devinfo paramsetver…
3-3 Firmware version query devinfo version…
3-4 Product name query devinfo productname…
3-5 Serial number query devinfo serialno…
3-6 Device ID query devinfo deviceid…
3-7 Product manufacture name query devinfo manufacturer…
3-8 Device name query event AMP:IdentifyDev…