User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Control
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Screen structure
- Basic process
- Start up, and register devices
- Placing widgets on a page
- Labeling widgets for easier recognition
- Adding a page
- Specifying a background for the page
- Adjusting the placement of the widgets
- Saving the project file
- Testing operation
- Making security settings
- Creating a controller file
- Making KIOSK start automatically
- Adding parameters or meters for an MTX/MRX system
- Functions specific to initial mode
- Title bar
- Menu bar
- Tool bar
- “Controllers” area
- “Devices” area
- “Widgets” area
- Work area
- “Properties” area
- Widgets
- Dialog boxes and windows
- “Setup” dialog box
- “New Project Wizard” dialog box
- “Add Controller” dialog box
- “Run Controller File” dialog box
- “Import Controller File” dialog box
- “Select Controllers to Import” dialog box
- “Export Controller File” dialog box
- “Imported Images” dialog box
- “Add Device” dialog box
- “Target Editor” dialog box
- “Edit Text” dialog box
- “Edit Device Identifier” dialog box
- “Select Image” dialog box
- “Master Style” dialog box
- “System Monitor” window
- “ProVisionaire Monitoring Service Settings” view
- Specifying the IP address
- Tips
- Troubleshooting
30
11. Press the [Select File] button, and select the image
file that is shown when the screen is locked.
12. In the “Select Image” dialog box, use the [Compres-
sion Ratio] slider to change the compression ratio.
Since this image data is embedded in the project file or controller
file, a lower compression ratio will increase the size of the file.
13. Click the [OK] button.
Close the dialog box to return to the “Setup” dialog box.
14. Click the [OK] button.
The dialog box closes.
15. On the tool bar, click the [Run] button .
KIOSK starts.