User Manual
Manuals
Brands
Yamaha Manuals
Loudspeaker Systems
VXL “P model” series
1
2
3
4
5
6
7
8
9
10
Table Of Contents
VXL1-16P Remote Control Protocol Specifications
0. Revision History
1. Setup
1.1. Connection Procedure
1.2. Configuring the Remote Controller
1.3. Device Configuration
2. Command List
2.1. Commands from a device sent to a remote controller
2.2. Commands for controlling a device
2.3. Extended commands
3. Command Specifications
3.1. Basic Command Specifications
3.2. Commands a Device Sends to a Remote Controller
3.2.1. Device status change notification
3.2.2. Parameter change notification
3.2.3. Meter information notification
3.2.4. Event processing change notification
3.3. Commands for controlling a device
3.3.1. Device status query
3.3.2. External control protocol run mode setting
3.3.3. Parameter query
3.3.4. Parameter setting
3.3.5. Meter control
3.4. Extended commands
3.4.1. Product information query request
3.4.2. Event processing request
4. Command Sequence
4.1. Communication start sequence
4.2. Parameter sync sequence
4.3. Parameter query sequence at any given time
4.4. Meter data request/query sequence
4.5. Sequence when parameters are changed by another controller
5. Meter Value
5.1. Level Meter, Hold Meter, GR Meter
5.1.1.
6. Parameter Value Details
6.1. Fader parameter
6.1.1. Fader with "-Infinity to 0dB" range
6.2. DRC
6.2.1. Ratio
6.2.2. Release
6.2.3. Hold
6.3. InputVolume
6.3.1. Level
6.4. Ducker
6.4.1. Release
6.4.2. Hold
6.5. MasterVolume
6.5.1. Level
6.6. InputEQ
6.6.1. Frequency
6.6.2. Q
6.7. Mixer
6.7.1. Level
6.8. RoomEQ
6.8.1. Frequency
6.8.2. Q
7. Parameter List
7.1. VXL1-16P
8. Meter List
8.1. VXL1-16P
VXL1-16P Remote Control Protocol Specications Version 1.2.0 rev2
4
0.
Revision History
Version
Date
Section
Description
V1.0.0
Sep. 11, 2019
-
Initial version
V1.2.0
Mar. 9, 2022
Addition of the commands regarding IP address settings.
1
...
2
3
4
5
6
...
...
39