User Manual

11
VXL1B-16P/VXL1W-16P Owner’s Manual
Installing the speakers
You can use the included mounting bracket to install the speaker on a
wall. Before installation, make sure the installation area can support the
weight of the speaker. Do not install on wallboard or similar materials.
CAUTION
Do not install the speakers horizontally, as the speakers may fall.
1
Attaching the bracket base to the wall
1-1
Place the included template on the wall, to decide where the
holes should go for the screws and cables.
1-2
Make holes in the wall for the cables, and pull the cables from
the PSE (Power Sourcing Equipment) through the holes.
1-3
Install the bracket base onto the wall. Position the narrow part
of the bracket base downward (towards the floor). The bracket
base holes should be 5.3 mm in size.
Bracket base
(screws not included)
444 mm