User Manual

18
VXL1B-16P/VXL1W-16P Owner’s Manual
1
Remove the pre‑installed screws from the wall
mount bracket (WMB‑L1).
Bracket base
Loosen
Loosen
Remove
Mounting bracket
2
Place the template against the wall, and
determine the location of the holes you’ll use to
attach the bracket base.
3
Install the bracket base onto the wall.
The bracket base holes are 12 mm in diameter.
4
Attach the mounting bracket and safety wire to
the speakers.
Attach the mounting bracket using the included screws.
For the position at which to attach the mounting bracket and safety
wire, refer to the following illustration.
Attaching the wall mount bracket (WMB-L1)