User Manual

Table Of Contents
VXL1-16P Remote Control Protocol Specications Version 1.2.0 rev2
17
3. Command Specications
3-7) Product manufacture name query
Command Option 1 Description
devinfo manufacturer Product manufacture name query
Response
Response string Description
OK devinfo manufacturer "xxxx" Product manufacture name
Details: xxxx = Product manufacture name
Example: Command: devinfo manufacturer
Notication: OK devinfo manufacturer "Yamaha Corporation"
Meaning: Query the manufacturer name.
Manufacturer name = "Yamaha Corporation"
3.4.2. Event processing request
3-8) Device conrmation
Command Option 1 Option 2 Description
event AMP:IdentifyDev duration Device conrmation
Details: duration = "xxx" ashing duration (s) 1 to 255, "off" specied to stop Identify
Response
Response string Description
OK event AMP:IdentifyDev "xxx" Device conrmation complete
Example: Command: event AMP:IdentifyDev "duration=5"
Notication: OK event AMP:IdentifyDev "duration=5"
Meaning: Blink the VXL1-16P LED for 5 seconds.
Start executing blinking process
3-9) DIP switch 6 (IP SETTING) status query
Command Option 1 Option 2 Description
event VXL:GetIpSetting "" DIP switch 6 (IP SETTING) status query
Response
Response string Description
OK event VXL:GetIpSetting "x" DIP switch 6 (IP SETTING) status
Details: x = 0 (UNIT ID) / 1 (PC)
Example: Command: event VXL:GetIpSetting ""
Notication: OK event VXL:GetIpSetting "1"
Meaning: Query the DIP switch 6 (IP SETTING) status
DIP switch 6 (IP SETTING) status ="PC"
3-10) IP address assignment (DHCP/Auto IP or Static IP) setting when the DIP switch 6 (IP SETTING) is set to "PC"
Command Option 1 Option 2 Description
event VXL:SetIpSettingPcMode "x" IP address assignment (DHCP/Auto IP or Static IP) setting
Details: x = 0 (DHCP/Auto IP) / 1 (Static IP)
Response
Response string Description
OK event VXL:SetIpSettingPcMode "x" IP address assignment (DHCP/Auto IP or Static IP) setting
completed
Example: Command: event VXL:SetIpSettingPcMode "1"
Notication: OK event VXL:SetIpSettingPcMode "1"
Meaning: Set the IP address assignment to Static IP
The IP address assignment is set to StaticIP