User Manual

15
VXL1B-16P/VXL1W-16P Owner’s Manual
Painting
We recommend that you paint this product using acrylic lacquer.
WARNING
Do not disassemble or modify this product (painting excepted).
This could cause electrocution, fire, injury, or malfunctions.
CAUTION
•Provide adequate ventilation while performing this work.
•When removing or attaching the grille, take care to avoid injury.
NOTICE
•When using volatile solvents, be careful of fire. Failure to take care
might cause fire or accidents.
•Damage caused by painting the speaker is not covered by the war-
ranty.
Painting the grille
1
Remove four screws each from the top and
bottom panels of the speaker, and remove the top
and bottom panels.
2
Taking care not to scratch the grille, slowly detach
it from the speaker.
CAUTION
When detaching the grille, wear gloves to avoid injuring your hand on
the edge of the grille.
3
Remove the emblem from the surface of the grille.
The emblem is fastened with adhesive tape.
4
Before painting, remove any dust or dirt from the
grille.
Do not use sandpaper.