User Manual

VXL1-16P Remote Control Protocol Specications Version 1.2.0 rev2
38
7. Parameter List
Parameter Access ID
Parameter Name MIN MAX unit Remarks
X Y
VXL:RoomEQ/On 0 0 Room
EQ
10Band
RoomEQAllOn AllOn OFF ON - 0: OFF
1: ON
VXL:RoomEQ/BandL/Bypass 0 0 - 3
0: Band A
1: Band B
:
3: Band D
RoomEQL On Bypass ON Bypass OFF - 0:Off(Bypass OFF)
1:On(Bypass ON)
VXL:RoomEQ/BandL/
Frequency
Frequency 20.000(*) 20.000k(*) Hz * 20000 - 20000000
(See"6.6.1 Frequency" in
Section 6)
VXL:RoomEQ/BandL/Gain Gain -18.0(*) 6.0(*) dB * dB x 10
ex -6.5dB x 10 = -65
VXL:RoomEQ/BandL/Q Q 0.1(*) 63.0(*) - * 100-63000
(See"6.6.2 Q" in Section 6)
Q x 1000
ex 0.53 x 1000 = 530
VXL:RoomEQ/BandL/Type Type PEQ(*) LPF(*) - * 0 - 6
0: PEQ
1: L.SHELF 6dB/Oct
2: L.SHELF 12dB/Oct
3: H.SHELF 6dB/Oct
4: H.SHELF 12dB/Oct
5: HPF
6: LPF
- _BypassResult OFF ON - 0: OFF
1: ON
VXL:RoomEQ/Band/Bypass 0 0 - 5
0: Band E
1: Band F
:
5: Band J
RoomEQ On Bypass ON Bypass OFF - 0:Off(Bypass OFF)
1:On(Bypass ON)
VXL:RoomEQ/Band/
Frequency
Frequency 100.000(*) 20.000k(*) Hz * 100000 - 20000000
(See"6.6.1 Frequency" in
Section 6)
VXL:RoomEQ/Band/Gain Gain -18.0(*) 6.0(*) dB * dB x 10
ex -6.5dB x 10 = -65
VXL:RoomEQ/Band/Q Q 0.1(*) 63.0(*) - * 100-63000
(See"6.6.2 Q" in Section 6)
Q x 1000
ex 0.53 x 1000 = 530
VXL:RoomEQ/Band/Type Type PEQ(*) LPF(*) - * 0 - 6
0: PEQ
1: L.SHELF 6dB/Oct
2: L.SHELF 12dB/Oct
3: H.SHELF 6dB/Oct
4: H.SHELF 12dB/Oct
5: HPF
6: LPF
AMP:Ch/Delay/On 0 0 Delay Delay On OFF ON - 0: OFF
1: ON
AMP:Ch/Delay/Time DelayTime 0.000(*) 100.000(*) ms * ms x 1000
ex: 24ms x1000 =24000
VXL:Oscillator/On 0 0 PinkNoise
Generator
OSC On OFF ON - 0: OFF
1: ON
VXL:Oscillator/Level Level -∞(*) 0.0(*) dB * -32768 - 0
(See"6.3.1.Level" in
Section 6)
AMP:Ch/Mute 0 0 Master
Vol.
MainVolume On Mute Unmute - 0:Off(Unmute)
1:On(Mute)
AMP:Ch/Volume Level -∞(*) 0.0(*) dB * -32768,13800 - 0
(See"6.3.1.Level" in
Section 6)
dB x 100
ex -24.5dB x 100 = -2450