User Manual

19
2-5-2. Surface mount speakers
Adjusting surface mount speaker output
Click the Surface Mount Speaker tab to specify settings for arranging surface mount speakers. The
following settings are available.
・ Installation location: Specify the speaker arrangement pattern.
・ None: None.
・ Two: Arranges two speakers in front.
・ Four: Arranges two speakers in front and two speakers in back.
・ Many: Arranges speakers around the room at the specified spacing.
・ Spacing:
・ X: Set the speaker spacing for across the room widthwise.
・ Y: Set the speaker spacing for along the room lengthwise.
This is not available when the layout pattern is set to "Two".
・ Angle:
・ Pan: Set the speaker horizontal angle (pan).
・ Tilt: Set the speaker vertical angle (tilt).
・ Height: Set the speaker installation height.
Note: Please use a period as a decimal point when entering numbers. Commas will be ignored.