Service manual

2-3

MAINTENANCE SPECIFICATIONS

ENGINE

Item Standard Limit

Cylinder head:

Warp limit ---- 0.05 mm (0.002

in)

Cylinder:

Bore size 77.00–77.01 mm (3.0315–3.0319 in) ----

Out of round limit ---- 0.05 mm (0.002

in)

Camshaft:

Drive method Chain drive (Left) ----

Camshaft cap inside diameter 22.000–22.021 mm (0.8661–0.8670 in) ----

Camshaft outside diameter 21.959–21.972 mm (0.8645–0.8650 in) ----

Shaft-to-cap clearance 0.028–0.062 mm (0.0011–0.0024 in) 0.08 mm (0.003

in)

Cam dimensions

Intake "A" 30.330–30.430 mm (1.1941–1.1980 in) 30.230 mm

(1.1902 in)

Intake "B" 22.45–22.55 mm (0.8839–0.8878 in) 22.35 mm

(0.8799 in)

Exhaust "A" 30.399–30.499 mm (1.1968–1.2007 in) 30.299 mm

(1.1929 in)

Exhaust "B" 22.45–22.55 mm (0.8839–0.8878 in) 22.35 mm

(0.8799 in)

Camshaft runout limit ---- 0.03 mm

(0.0012 in)

Timing chain:

Timing chain type/No. of links 92RH2010-114M/114 ----

Timing chain adjustment method Automatic ----