Service manual

2-14
TIGHTENING TORQUES
1. First, tighten the steering ring nut approximately 38 Nm (3.8 m•kg, 27 ft•lb) by using the steering nut wrench, then loosen
the steering ring nut one turn.
2. Retighten the steering ring nut 7 Nm (0.7 m•kg, 5.1 ft•lb).
ELECTRICAL
Radiator mounting boss and frame M10 × 1.25 2 20 2.0 14
△ Front fender M6 × 1.0 4 10 1.0 7.2
△ Rear fender (front) M6 × 1.0 2 7 0.7 5.1
△ Rear fender (rear) M6 × 1.0 2 16 1.6 11
△ Side cover M6 × 1.0 2 7 0.7 5.1
Seat M8 × 1.25 2 23 2.3 17
△ Number plate M6 × 1.0 1 7 0.7 5.1
Part to be tightened Thread size Q'ty
Tightening torque
Nm m•kg ft•lb
Part to be tightened Thread size Q'ty
Tightening torque
Nm m•kg ft•lb
Stator M6 × 1.0 3 10 1.0 7.2
Rotor M12 × 1.25 1 56 5.6 40
Neutral switch M5 × 0.8 2 4 0.4 2.9