Service manual

8-19
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
QSTS cable (jet pump side) installation
1. Install:
● QSTS cable (jet pump side) a
WARNING
The QSTS cable must be screwed in more
than 8 mm (0.31 in).
QSTS cable set length
(jet pump side):
12.0 ~ 14.0 mm (0.47 ~ 0.55 in)
QSTS cable stopper installation
1. Install:
● QSTS cable stopper
WARNING
Be sure to fit the projection 1 on the QSTS
cable stopper into the groove in the outer
cable.
Shift cable (jet pump side) installation
1. Install:
● Shift cable (jet pump side) a
WARNING
The shift cable must be screwed in more
than 8 mm (0.31 in).
Shift cable set length
(jet pump side):
12.2 ~ 13.8 mm (0.48 ~ 0.54 in)