User Manual

RevolabsHybridHDMicrophones

andHybridXLRAdapter

InstallingtheRevolabsHybridHDMicrophoneorXLRAdapter

iseasy.Simplyplugthepowersupplyintoapoweroutlet,

connectittothehybridpoweradapter,andplugthe

microphoneintothepoweradapter.TheHybridMicrophone

orXLRAdapterwillpoweronandbereadyforuse.Hybrid

MicrophonesandXLRAdaptersarealwaysacveandcharg

ing

whileinthepoweradapter.Aerroughly2hoursinthe

chargerthemicrophonebaerywillhaveafullcharge.At

thatmethemicrophonecanberemovedfromthepower

adapterasrequired.

PermanentlyinstallingtheHybridMicrophones

Usetheprovidedwipetocleantheboomofthehybrid

microphonepoweradapter.Whendry,aachtheprovidedtape

totheboom.

Cleanthesurfaceonwhichyouwanttoplacethehybrid

microphonewithapprovedcleaningmaterial.Placethe

microphoneinthepoweradapterbeforeremovingtheprotecve

coverfromthetapeandaachingittothesurface.

Provideslight

pressuretothepoweradapterforabout60secondstoensurethe

tapeconnectswiththeunderlyingsurface.Holdthechargersecurelywhileaaching

thepowercord.Lettheadhesivecurefor24hoursbeforetakingthemicrophoneoutof

thecharg

er.

PairingHybridMicrophones

TopairthehybridmicrophonetotheHDreceiver,youwillneedtoturnoﬀthe

microphone.ToturnoﬀthemicrophoneorXLRadapter,takeitoutofthepower

adapterandthenholddownthemulfunconbuonunltheLEDonthemicrophone

turnsconstantred.Releasethebuon—themicrophoneisnowturnedoﬀ.

Oncethemicrophoneisturnedoﬀ,pressthemulfunconbuonandholditdown

unltheLEDturnsconstantred.Themicrophoneisnowinpairingmode.BringtheHD

receiverintopairingmodeaswell.Oncethemicrophoneandthereceiverarepaired,

themicrophoneLEDwilleitherblinkgreen(unmuted)orred(muted).

MN-HYBRID-HD-MICS AND-XLR-ADAPTER-20180508-EN

PAGE 1
Revolabs Hybrid HD Microphones and Hybrid XLR Adapter Installing the Revolabs Hybrid HD Microphone or XLR Adapter is easy. Simply plug the power supply into a power outlet, connect it to the hybrid power adapter, and plug the microphone into the power adapter. The Hybrid Microphone or XLR Adapter will power on and be ready for use. Hybrid Microphones and XLR Adapters are always ac ve and charging while in the power adapter. A er roughly 2 hours in the charger the microphone ba ery will have a full charge.