User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
100
FADE TIME page
1 FADING ENABLE
This button enables or disables the Fade function for the current scene faders.
2 INDIVIDUAL ENABLE
This button specifies whether or not the Fade function will be configured for each channel associated with the current
scene. If this function is enabled, the indication for each channel will change.
3 INPUT, ST IN, DCA
These are on/off buttons that select input channels to be excluded from recall operations.
4 CLEAR ALL
This button switches off the buttons for all input channels.
5 SET ALL
This button switches on the buttons for all input channels.
6 MIX, MATRIX, STEREO/MONO
These are on/off buttons that select output channels to be excluded from recall operations.
7 CLEAR ALL
This button switches off the buttons for all output channels.
8 SET ALL
This button switches on the buttons for all output channels.
9 FADE TIME
Drag this knob on screen to adjust the fade time. The current value is shown in the numerical box immediately below.
1
2
3
4
5
7
9
8
6