User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
110
SENDS ON FADER mode enables you to adjust the send level to the MIX/MATRIX bus using the fader. In this mode, the
signals sent from all input channels to a specific MIX/MATRIX bus can be adjusted simultaneously.
Use the SENDS ON FADER button in the Sends On Fader window or Main window to switch this mode on and off.
To display this window, do one of the following:
• Select [Sends On Fader] in the [Windows] menu.
• Click the SENDS ON FADER button in the Main window.
In SENDS ON FADER mode, the color and function of the [ON] button and the fader in the Overview window will
change.
Click the button (in the Sends On Fader window) for the MIX/MATRIX bus for which you want to adjust the send level.
Then switch the send level off or on, and adjust the send level using the [ON] button and fader for the input channel dis-
played in the Overview window.
• For MATRIX bus send, not only the input channels but MIX channels and STEREO/MONO channels can be in
SENDS ON FADER mode.
• In Surround mode, the MIX bus (1-6) send will be disabled and these buttons will become inoperative.
[ON] button
Color of the send destination Send is on.
Gray Send is off.
Fader
Color of the send destination The signal is sent to the bus.
Gray The signal is NOT sent to the bus.
Sends On Fader window
NOTE