User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
112
5 Channel name
Indicates the name of the channel that is assigned to the corresponding output port.
6 DELAY button
Switches the output port delay on/off.
7 Delay time
The millisecond delay time value is shown above the knob.
The delay time value in the units selected in the DELAY SCALE field (
2) is shown below the knob.
Click the
▲/▼ buttons to make detailed settings.
8 DELAY TIME (Delay time knob)
This knob sets the delay time of the output port. Rotate (by dragging) this knob to set the delay time.
9 Ø (Phase) button
Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase (orange.)
It is not adjustable if the output-port is set to the RECORDER.
0 GAIN knob
Adjusts the gain level for the signal assigned to the output port. To change the value, rotate (by dragging) the knob in
the screen. You can adjust the setting in 0.1 dB steps over a range of –96 to +0 dB. The current value is shown immedi-
ately below the knob.
A Level meter
This meter indicates the level of the signal assigned to the output port.