User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
3
9 Set Default
Press this button to use the settings (except for the IP Address in the Network section) currently specified in the System
Setup dialog box as the default settings. The next time when you start up CL Editor, it will use these settings.
❏ Mixer Setup
To open the Mixer Setup dialog box, choose [Mixer Setup] from the [File] menu.
1 Mix Bus Setup
Here you can make settings relating to the MIX buses.
Signal Type: Choose either MONOx2 or STEREO for each
two adjacent odd-numbered/even-numbered MIX buses.
In Surround mode, choose surround buses (L, R, C, LFE, Ls,
Rs) for Mix buses 1–6.
Bus Type/Send Point: Choose either VARI (PRE
FADER) or VARI (PRE EQ) or FIXED for each two adjacent
odd-numbered/even-numbered MIX buses.
Pan Link: The PAN setting for signals sent to stereo MIX
buses will link to the PAN setting for the STEREO bus. This
parameter is valid only if the Signal Type is set to STEREO
and the Bus Type is set to VARI.
2 Matrix Bus Setup
Here you can make settings relating to the MATRIX buses.
Signal Type: Choose either MONOx2 or STEREO for each
two adjacent odd-numbered/even-numbered MATRIX
buses.
Send Point for Input Channels: Choose either PRE
FADER or PRE EQ for each two adjacent odd-numbered/even-numbered MATRIX buses.
Pan Link: The PAN setting for signals sent to stereo MATRIX buses will link to the PAN setting for the STEREO bus.
This parameter is valid only if the Signal Type is set to STEREO.
3 Surround Mode
Here you can make settings for Surround mode.
Stereo: Selects standard Stereo mode.
5.1Surround: Selects Surround mode.
❏ Zoom Function
Access the [Zoom] menu to select a screen zoom ratio: [100%] (default), [150%], or [200%].
3
1
2