User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
43
❏ DELAY
1 ON
Turns the delay on/off of the currently selected channel.
2 Delay time
Drag the knob in the screen to adjust the delay time of the currently selected channel.
❏ INSERT 1/2 (except for ST IN channels)
1 POINT (Insert point)
Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON.
2 ON
Enables/disables insert-in/out.
3 OUT (Insert out)
Click this to select the output port that will be assigned to insert-out, from the following choices.
4 IN (Insert in)
Click this to select the input port that will be assigned to insert-in, from the following choices.
NONE No assignment
OMNI 1-OMNI 8 OMNI OUT jacks 1–8
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Output channels of an I/O card installed in slots 1–3
GEQ1L(A), GEQ1R(B)...GEQ8L(A), GEQ8R(B) L/R inputs of GEQ rack 1–8
FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R inputs of EFFECT rack 1–8
PR1L(A), PR1R(B)...PR8L(A), PR8R(B) L/R inputs of PREMIUM rack 1–8
NONE No assignment
OMNI 1-OMNI 8 OMNI IN jacks 1–8
SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16 Input channels of an I/O card installed in slots 1–3
GEQ1L(A), GEQ1R(B)...GEQ8L(A), GEQ8R(B) L/R outputs of GEQ rack 1–8
FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R outputs of EFFECT rack 1–8
PR1L(A), PR1R(B)...PR8L(A), PR8R(B) L/R outputs of PREMIUM rack 1–8
2 1
1 2
5
6
34