User Manual

CL Editor Owner’s Manual
48
❏ EQ (Equalizer)
1 TYPE
Selects PRECISE, AGGRESSIVE, SMOOTH, or LEGACY as the EQ type.
2 LIBRARY
Accesses the OUTPUT EQ page of the Library window.
3 ON
Switches the EQ on/off.
4 EQ graph
Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down the
<Ctrl>(< >) key of your computer keyboard and click the graph.
5 Q
These knobs adjust the Q level of the frequency range selected in the EQ graph.
6 FREQ (FREQUENCY)
These knobs adjust the center frequency for the four bands LOW, LO-MID, HI-MID, and HIGH.
7 GAIN
These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID, and
HIGH.
8 BYPASS
These buttons turn bypass on/off for the parameters (Q/Freq/Gain) of each band.
9 HIGH shelving
If this button is on, the HIGH EQ will be switched to a shelving type. If the EQ type is PRECISE, the Q knob of HIGH
EQ adjusts the Q value of the shelving type EQ. For other EQ types, the Q knob of the HIGH EQ is not shown.
0 LPF (Low Pass Filter)
If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ is not displayed, and
the GAIN knob acts as the low pass filter on/off switch.
5
9
0
A
B
321
4
7
6
D
C
8