User Manual

CL Editor Owner’s Manual
61
OUTPUT INSERT PATCH page
Here you can assign input/output ports to the insert-in/out of each output channel. Select the output port in the left side of
the screen, and the input port in the right side of the screen.
1 INSERT1/INSERT2
These buttons switch the display between INSERT 1 and INSERT 2.
2 Current number of inserts
The number of inserts that are currently assigned for the group.
If you assign more inserts than the maximum available number, this number will be displayed in red, and the indi-
cator will appear next to it.
If you assign more inserts than the maximum available number, the excessive inserts will be invalid.
Also, the indicator will appear in the corresponding channel grid.
3 Maximum available number of inserts
The maximum number of inserts that are available for the group.
There is a limitation to the sum of INSERT 1 and INSERT 2 for each channel group, as shown below. You can assign
inserts for input ports and output ports separately.
Channel group MIX/ST MONO MATRIX
Maximum available
number of inserts
30
(24 in Surround mode)
8
Output port selection Input port selection
1 2 3
NOTE