User Manual

CL Editor Owner’s Manual
66
2 Input patch
Select the input port (s) that will be assigned to the rack, from the following choices.
This is not shown if nothing is mounted in the rack.
3 Module graphic
This area shows a graphic and parameters for the GEQ module, PEQ module or automixer that is currently assigned to
the rack.
You cannot edit the parameters in this screen.
Double-click this to open the module editor for that rack unit.
By holding down the <Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open multiple
rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window
of the CL itself.
4 Input meter/Output meter
These indicate the level of the signals being input and output from the rack.
5 Output patch
Select the output port(s) that will be assigned to the rack, from the following choices.
6 ON
This switches the GEQ module or PEQ module between active and bypassed states. The GEQ module or PEQ module
is active when the ON button is lit.
7 GEQ Link Indicator
If a GEQ LINK is active, the GEQ Link indicator will be displayed in the left side of the rack (➥ p.69.)
NONE No assignment
INS1 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert out 1 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS1 MIX 1–24 MIX channel 1–24 insert out 1
INS1 MTRX1–8 MATRIX channel 1–8 insert out 1
INS1 ST L, INS1 ST R, INS1 M(C) Insert out 1 of STEREO channel L/R or the MONO channel
INS2 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert out 2 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS2 MIX 1–24 MIX channel 1–24 insert out 2
INS2 MTRX1–8 MATRIX channel 1–8 insert out 2
INS2 ST L, INS2 ST R, INS2 M(C) Insert out 2 of STEREO channel L/R or the MONO channel
NONE No assignment
INS1 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert in 1 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS1 MIX 1–24 MIX channel 1–24 insert in 1
INS1 MTRX1–8 MATRIX channel 1–8 insert in 1
INS1 ST L, INS1 ST R, INS1 M(C) Insert in 1 of STEREO channel L/R or the MONO channel
INS2 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert in 2 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS2 MIX 1–24 MIX channel 1–24 insert in 2
INS2 MTRX1–8 MATRIX channel 1–8 insert in 2
INS2 ST L, INS2 ST R, INS2 M(C) Insert in 2 of STEREO channel L/R or the MONO channel