User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
68
1 Rack No. (Rack selection)
Select the rack module of the GEQ rack that you want to control.
2 LIBRARY
This button accesses the GEQ library. Clicking this button will open the
GEQ page of the Library window.
For the 8Band PEQ, this button accesses the 8Band PEQ library. Click this
button to open the 8BAND PEQ page of the Library window.
3 Input patch
Click the CHANNEL field, and choose one of the following as the signal route that will be
patched to the input channel(s) of the currently selected GEQ module and PEQ module
(If the module is mounted in the GEQ rack).
The channel name is shown in the boxes immediately below.
4 Input meter
This indicates the level of the signal that is being input to the currently selected GEQ mod-
ule and PEQ module.
5 Output patch
Click the CHANNEL field, and choose one of the following as the signal route that will be
patched to the output channel(s) of the currently selected GEQ module and PEQ module
(If the module is mounted in the GEQ rack).
The channel name is shown in the boxes immediately below.
NONE No assignment
INS1 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert out 1 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS1 MIX 1–24 MIX channel 1–24 insert out 1
INS1 MTRX1–8 MATRIX channel 1–8 insert out 1
INS1 ST L, INS1 ST R,
INS1 M(C)
Insert out 1 of STEREO channel L/R or the MONO channel
INS2 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert out 2 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS2 MIX 1–24 MIX channel 1–24 insert out 2
INS2 MTRX1–8 MATRIX channel 1–8 insert out 2
INS2 ST L, INS2 ST R,
INS2 M(C)
Insert out 2 of STEREO channel L/R or the MONO channel
NONE No assignment
INS1 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert in 1 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS1 MIX 1–24 MIX channel 1–24 insert in 1
INS1 MTRX1–8 MATRIX channel 1–8 insert in 1
INS1 ST L, INS1 ST R,
INS1 M(C)
Insert in 1 of STEREO channel L/R or the MONO channel
INS2 CH1–72
(1–48 on CL1, 1–64 on CL3)
Input channel 1–72 insert in 2 (1–48 on CL1, 1–64 on CL3)
Can be selected for only GEQ racks 1–8.
INS2 MIX 1–24 MIX channel 1–24 insert in 2
INS2 MTRX1–8 MATRIX channel 1–8 insert in 2
INS2 ST L, INS2 ST R,
INS2 M(C)
Insert in 2 of STEREO channel L/R or the MONO channel
2
1
3 4
65