User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
70
1 A/B
Toggles between A and B of 8BandPEQ.
2 TYPE
Selects PRECISE, AGGRESSIVE, SMOOTH, or LEGACY as the EQ type.
3 LINK
Links the A and B settings. When you click this button, a window will ask you for confirmation. Click the buttons for
the modules you want to use as the parameter copy-source and copy-destination. If you click the RESET BOTH button,
the parameters for both modules will be reset to the default state.
4 PEQ graph
Indicates the response of the currently-selected module. Numbers and symbols on the graph refer to the bands and fil-
ters. Drag them to change the values.
5 ON (PEQ On/Off)
Switches the currently-selected module on or off.
6 HPF (High-Pass Filter)
Use the [ON] button next to the knob to switch the high-pass filter on or off. Use the knob to adjust the cutoff fre-
quency. The current value is indicated in the numerical box below the knob. An indication of “H” will appear on the
PEQ graph.
7 HPF Type
Switches the attenuation per octave of the high-pass filter to –24dB/oct, –18dB/oct, –12dB/oct, or -6dB/oct.
B
A
C
D
32
0
9
6
7
8
5
4
E
1
● 8BandPEQ