User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
71
8 Q
Adjusts the Q value for each band. The current value is indicated in the numerical box below the knob.
9 FREQ (Frequency)
Adjusts the center frequency for each band. The current value is indicated in the numerical box below the knob.
0 GAIN
Adjusts the boost/cut amount for each band. The current value is indicated in the numerical box below the knob.
A BYPASS
These buttons turn bypass on/off for the parameters (Q, FREQ, GAIN) of each band.
B LPF (Low-Pass Filter)
Use the [ON] button next to the knob to switch the low-pass filter on or off. Use the knob to adjust the cutoff frequency.
The current value is indicated in the numerical box below the knob. An indication of “L” will appear on the PEQ graph.
C LPF Type
Switches the attenuation per octave for the low-pass filter to –24dB/oct, –18dB/oct, –12dB/oct, or –6dB/oct.
D NOTCH A, B, C (Notch filter A, B, C)
CL Editor features three notch filters.
Use the left knob to adjust the Q value. Use the right knob to adjust the center frequency. Use the [ON] button next to
the knobs to switch the notch filter on or off. The current value is indicated in the numerical box below the knob. An
indication of “A”, “B”, or “C” will appear on the PEQ graph.
E EQ FLAT
Resets all gain values to 0dB.