User Manual

CL Editor Owner’s Manual
76
(*) CL3: 1–64, CL1: 1–48
3 Module graphic
This area shows a graphic of the effect module, the GEQ module or the PEQ module that is currently assigned to the
rack, and the parameters of that module. You cannot edit the parameters on this page. Double-click this to open the
module editor for that rack unit. By holding down the <Ctrl>(< >) key of your computer keyboard and double-click-
ing this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked
with the RACK popup window of the CL itself.
4 Input meter/Output meter
These indicate the level of the signals being input and output from the effect module, the GEQ module or the PEQ
module.
5 Output patch
Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to
the L/R output channels of the internal effect.
(*) CL3: 1–64, CL1: 1–48
6 BYPASS
This switches the effect module or the GEQ module between active and bypassed states. An effect module is active
when the BYPASS button is dark.
INS2 CH 1–72(*) INPUT channel 1–72(*) insert out 2
INS2 MIX 1–24 MIX channel 1–24 insert out 2
INS2 MTRX1–8 MATRIX channel 1–8 insert out 2
INS2 ST L, INS2 ST R, INS2 M(C) Insert out 2 of STEREO channel L/R or the MONO channel
NONE No assignment
CH 1–72(*) INPUT channel 1–72(*)
STIN1L–STIN8R ST IN channel 1–8 L/R
INS1 CH 1–72(*) INPUT channel 1–72(*) insert in 1
INS1 MIX 1–24 MIX channel 1–24 insert in 1
INS1 MTRX1–8 MATRIX channel 1–8 insert in 1
INS1 ST L, INS1 ST R, INS1 M(C) Insert in 1 of STEREO channel L/R or the MONO channel
INS2 CH 1–72(*) INPUT channel 1–72(*) insert in 2
INS2 MIX 1–24 MIX channel 1–24 insert in 2
INS2 MTRX1–8 MATRIX channel 1–8 insert in 2
INS2 ST L, INS2 ST R, INS2 M(C) Insert in 2 of STEREO channel L/R or the MONO channel