User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
81
PREMIUM page
1 Mount
Select a PREMIUM rack module (EQ or compressor) for mounting in the rack, from the following choices: BLANK,
Portico5033 (DUAL/STEREO), Portico5034 (DUAL/STEREO), Portico5045 (STEREO/DUAL), U76 (DUAL/STE-
REO), Opt-2A (DUAL/STEREO), EQ-1A (DUAL/STEREO), DynamicEQ (DUAL/STEREO), Buss Comp 369 (DUAL/
STEREO), and MBC4 (STEREO/DUAL).
U76 (DUAL/STEREO) can be mounted only in an odd-numbered rack, and occupies two rack spaces.
2 Input patch
Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the stereo EQ or compressor), and choose one
of the following as the signal route that will be patched to the input channel(s) of the currently selected PREMIUM rack
module.
NONE No assignment
MIX 1–24 MIX channel 1–24 (only for rack 1–2)
MATRIX1–8 MATRIX channel 1–8 (only for rack 1–2)
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel (only for rack 1–2)
INS1 CH 1–72(*) INPUT channel 1–72(*) insert out 1
INS1 MIX 1–24 MIX channel 1–24 insert out 1
INS1 MTRX1–8 MATRIX channel 1–8 insert out 1
INS1 ST L, INS1 ST R, INS1 M(C) Insert out 1 of STEREO channel L/R or the MONO channel
1 2 3 4 56