User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
92
If you link two or more input channels, the parameters of these channels will interlock with each other and change simul-
taneously.
1 Link buttons
Use these buttons to select the link group A-Z, a-n to which you want each input channel to be assigned. If you don’t
want an input channel to be linked, select NONE. You can assign up to forty groups (CL5: 40 groups, CL3: 36 groups,
CL1: 28 groups) for INPUT CH 1–72 (CL3: 1–64, CL1: 1–48.)
2 CLEAR ALL
Clears the link settings for all channels.
3 LINK GROUP button
If you select a link group using one of the corresponding Link buttons (1), the LINK GROUP button will automati-
cally select the same link group.
4 LINK PARAMETER
This section enables you to select the parameters to interlock.
The HA, FADER, DIGITAL GAIN, and DELAY parameters will maintain level differences between linked channels.
5 SEND PARAMETER
Specify the link status for each MIX/MATRIX SEND bus.
HA Head amp gain and phantom power settings
HPF HPF settings
DIGITAL GAIN DIGITAL GAIN settings
EQ Equalizer settings
DYNAMICS1 Dynamics 1 settings
DYNAMICS2 Dynamics 2 settings
INSERT INSERT settings
DIRECT OUT DIRECT OUT settings
MIX SEND Send amount from input channel to MIX bus
MIX ON MIX SEND on/off
MATRIX SEND Send amount from input channel to MATRIX bus
MATRIX ON MATRIX SEND on/off
FADER Fader level value
DCA DCA settings
CH ON Input channel module output on/off
MUTE Mute settings
TO ST TO ST settings
DELAY Delay settings
2
1
3
5
4
NOTE