User Manual

CL Editor Owner’s Manual
95
7 No.
This is the scene number in the file you opened.
8 TITLE
This is the scene title. You can also double-click this area and edit the title.
9 PROTECT
This indicates whether protect is on or off for each scene. This area displays a lock icon for protected scenes; these
scenes cannot be overwritten, nor their title edited. Read-only scenes are indicated by “R” displayed in this column.
You can use this protect function for read-only scenes only on the CL unit. Read-only scenes (excluding
scene No. 000) are indicated by an R symbol if the CL Editor and the CL unit are connected online.
0 COMMENT
This column shows the comment assigned to each scene. You can also double-click this column and edit the comment.
A FOCUS
This displays the parameters that will be recalled by scene recall.
• [FOCUS] button
This switches the FOCUS button on/off.
• [SET] button
(only for INTERNAL DATA list)
Click this to access the Focus Recall Setup
screen (shown at right), where you can view
the Focus function settings for each scene.
For an explanation of the contents shown,
refer to the FOCUS RECALL page. (➥ p.102)
• FOCUS Indicator
Indicates the status of the Focus Recall set-
tings. The indicator will lit in black when all
parameters are set to off.
It will lit in green when all parameters are set
to on and lit in blue when only some parame-
ters are set to on.
RACK GEQ and internal effect settings will be recalled
HA Internal head amp and external head amp settings will be recalled
IN PATCH Input patch settings will be recalled
OUT PATCH Output patch settings will be recalled
IN Input channels (INPUT, ST IN, DCA) settings will be recalled except for head amp settings
OUT Output channel (MIX, MATRIX, STEREO/MONO) settings will be recalled
WITH SEND Send settings to the output channels will be recalled
DCA DCA settings will be recalled
OTHERS Other settings will be recalled
7 8 9 0 BA C ED
NOTE