User Manual

Table Of Contents

I/O devices and external head amps

V5.1 Supplementary Manual

I/O devices and external head amps

Now supports various Dante devices such as digital wireless receivers, processors, and more

from third-party partners, plus NEXO and Yamaha.

• Sony DWR-R03D DWX Digital Wireless Receiver

• Stagetec NEXUS(XDIP) Multichannel I/O Board

• NEXO NXAMPmk2 Powered TD Controller

• Yamaha DZR-D series Powered Loudspeakers

DXS XLF-D series Powered Subwoofers

MRX/MTX series Signal Processors

Added supported devices

The devices can be mounted on the DEVICE MOUNT page in the DANTE SETUP window.

The indicator ( ) appears in the remote control supported device.

The NXAMPmk2 supports remote control with the Dante card (NXDT104mk2).

Remotely controlling an external head amp

Now supports the HA remote controllable devices.

• Stagetec NEXUS(XDIP) Multichannel I/O Board

• Yamaha MRX/MTX series Signal Processors

I/O DEVICE screen (I/O page)

1 +48V indicator

Indicates the phantom power (+48V) on/off status for each port.

2 GAIN knob

Indicates the gain of the head amp on the I/O device. This screen is only for display; the

value cannot be edited.

3 HPF indicator

Indicates the high-pass filter on or off status for each port.

4 Control status indicator

Indicates the control status of the device.

5 SYSTEM/SYNC indicators

Displays the error, warning, and information messages of the Dante device.

6 OUTPUT PATCH button

Appears when selecting a device (for I/O DEVICE) having a large number of channels.

Touch to open the OUTPUT PATCH window.