User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
35
DTX-PRO DTX-PROX Reference Manual
VoiceLayerSw Sets how the voices assigned to the trigger
input source are played.
stack Plays voices registered to layers simultane-
ously.
alt Plays voices registered to layers in sequential
order.
VoiceHoldMode Sets the hold mode for the voice.
on When User is selected for the voice category,
striking the pad plays the sounds repeatedly in
a loop, and striking the pad again stops the
sound. MIDI Key On and Key Off messages are
sent alternately each time the pad is struck.
off With this setting, the pad plays one-shot
sounds.
A MIDI Note On message is sent when a pad is
struck, and the corresponding Note Off mes-
sage is sent automatically after the gate time
has elapsed.
MessageType Sets the type of MIDI message to be sent
when the pad is struck.
Any setting other than “note” does not produce a
sound when the pad is struck.
note Sends a MIDI note. Use this parameter to set
the pad to produce a sound when struck. You
can assign a MIDI note to each layer to send
up to four MIDI notes at once.
Note.1–4off, 1(C
#
-2) –
127(G8)
Sets the MIDI note number that is sent when-
ever a trigger signal is received at the selected
trigger input source.
Settings are displayed as “Note number / Note
name.”
You can use the [F3] button to select Note1 to
Note4 in order.
MIDI Ch 1–16 Sets which MIDI channel to use for sending out
the MIDI message to play the Trigger Input
Source.
GateTime 0.0s–9.9s Sets the gate time (the time that passes
between the output of MIDI Key On and Key
Off messages) for the trigger input.
Screen Parameter Settings Description
NOTE