User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
68
DTX-PRO DTX-PROX Reference Manual
5. Start editing.
If a wave has already been loaded to the selected bank, or if a file
with the same file name already exists, the overwrite confirmation
screen will appear.
If you do not want to overwrite, press the “NO” button ([F3]) to return
to the previous screen.
Screen Parameter Description
IMPORT Select a file in the confirmation screen and press the
“YES” button ([F1]).
Press the “NO” button ([F3]) to cancel changes.
DELETE In the confirmation screen, press the “YES” button
([F1]).
Press the “NO” button ([F3]) to cancel changes.
LO/HI Select the target for editing (Low or High) with [F3], and
then set the value with the [–][+] controllers.
You can also use with the [COMP] knob to set the lowest
value, and the [EFFECT] knob to set the highest value.
SPLIT When the confirmation screen appears, press the “YES”
button ([F1]).
Press the “NO” button ([F3]) to cancel changes.
NAME Use the [–][+] controllers to select a character, and then
use the “ ” and “ ” buttons ([F1] and [F3]) to move
the cursor to the next character position. A wave name
of up to 16 characters can be assigned.
When you are finished entering all characters, press the
“OK” button ([F2]).