User Manual
Table Of Contents
- Cover
- Contents
- Links from the Owner’s Manual
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- DTX-PRO Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- TRAINING Mode
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
50
DTX-PRO Reference Manual
MENU/Master EQ
Screen Parameter Settings Description
MEQ Gain
Lo -12 – +0 – +12 Use these parameters to boost or cut the center-
frequency levels of the Low, LowMid, Mid, High-
Mid, and High MEQ Freq settings, respectively.
LoMid
Mid
HiMid
Hi
MEQ Freq
Low 32Hz–2.0kHz Use these parameters to set the center frequen-
cies of the low, mid, and high frequency bands,
respectively.
LowMid 100Hz–10kHz
Mid 100Hz–10kHz
HighMid 100Hz–10kHz
High 500Hz–16kHz
MEQ Q
Low 0.1–12.0 Use these parameters to change widths for the
low, mid, and high frequency bands, respectively.
The greater the value the narrower the frequency
range becomes, resulting in sudden changes in
tone. The smaller the value the broader the fre-
quency range becomes, resulting in smoother
changes in tone.
If the MEQ Shape value has been set to “shelving,” the
Q setting will be displayed as “----” and will be unavail-
able.
LowMid
Mid
HighMid
High
Center frequency
Frequency
(Hz)
Q=12.0
Q=0.1
NOTE