User Manual
Table Of Contents
- Cover
- Contents
- Links from the Owner’s Manual
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- DTX-PRO Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- TRAINING Mode
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
53
DTX-PRO Reference Manual
MENU/Phones EQ
Screen Parameter Settings Description
HPEQ Gain
Lo -12 – +0 – +12 Use these parameters to boost or cut the center-
frequency levels of the Low, LowMid, HighMid,
and High HPEQ Freq settings, respectively.
LoMid
HiMid
Hi
HPEQ Freq
Low 16.0Hz–24.4kHz Use these parameters to set the center frequen-
cies of the low, mid, and high frequency bands,
respectively.
LowMid
HighMid
High
HPEQ Q
Low 0.1–12.0 Use these parameters to change widths for the
low, mid, and high frequency bands, respectively.
The greater the value the narrower the frequency
range becomes, resulting in sudden changes in
tone. The smaller the value the broader the fre-
quency range becomes, resulting in smoother
changes in tone.
If the HPEQ Shape value has been set to “shelving,”
the Q setting will be displayed as “----” and will be
unavailable.
LowMid
HighMid
High
Center frequency
Frequency
(Hz)
Q=12.0
Q=0.1
NOTE