User Manual
Table Of Contents
- Cover
- Contents
- Links from the Owner’s Manual
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- DTX-PRO Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- TRAINING Mode
- Connecting a Computer
- Troubleshooting
- Reference
MENU Button
71
DTX-PRO Reference Manual
5. Save the file.
5-1.
Press the “SAVE” button ([F3]).
The Save confirmation screen appears.
5-2.
If you wish to save the file, press the “YES” button ([F1]) If you wish to save under a different name, press the “NO” button ([F3])
and the screen returns to step 2.
If a file with the same file name already exists, the overwrite confirmation screen, as shown below, appears.
If you wish to save the file under a different name, press the “NO” button ([F3]) and the screen returns to step 2.
6. Press the “YES” button ([F1]) to save.
A message shown below appears during the Save process.
Pressing the “CANCEL” button ([F3]) during the Save process stops the process and the screen returns to step 2.
“Completed.” appears when the Save process is complete, and the screen returns to step 2.
NOTICE
Do not disconnect the USB flash drive from the [USB TO DEVICE] terminal or turn off the power to the DTX-PRO while the file is
being saved. Doing so may cause the DTX-PRO to malfunction, or corrupt memory in the USB flash drive.