User Manual

Channel Detail Page 22
NetworkAmp Manager—Owner’s Manual
Channel Detail Page
The Channel Detail page offers a detailed view of each channel. It can be opened by clicking
the Channel Detail tab while an ACU16-C is selected in the network tree, or by clicking a
power amplifier channel icon in the network tree.
Channel select: This section is used to select the power amplifier channel that you want
to view. Use the Amp pop-up menu to select a power amplifier. Use the CH pop-up menu
to select a channel. The names of the selected amplifier and channels are displayed next to
the pop-up menus. The Model information field displays information about the selected
power amplifier.
POWER button: This button is used to set the power amplifier to On or Standby.
PROTECT indicator: The status of the power amplifier’s protection system is displayed
here. Normally there’s no indication. If the amplifier’s protection system is activated, for
example, the power supply to the power amplifier’s driver section fails because of overheat-
ing, “PROTECT” is displayed. It’s also displayed if the power amplifier is set to Standby by
clicking the POWER button in NetworkAmp Manager.
PROTECT
indicator