User Manual

2
Recording/Playback
Your Waves SoundGrid application (SoundGrid Studio or MultiRack SoundGrid) must be open at all times
to configure the driver.
After installation, the Waves SoundGrid driver will appear as available in your DAW even before you
launch the Waves SoundGrid application.
1. Recording/Playback with the SoundGrid Studio Application
If you choose to use the SoundGrid Studio Application as your setup application, refer to the following
images for configuration.
The first time you run and configure your WSG-Y16 card, you may be prompted to update the firmware
of your device. Follow the onscreen instructions.