Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- File / Format Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Installation
- Power On
- Connecting to a Network
- Home Audio Network with MusicCast
- Connecting to a Network by Sharing the iOS Device Setting
- Listening to Internet Radio
- Listening to Songs in the Computer and NAS
- Playing Back Music with AirPlay
- Listening to Music from Your Bluetooth Device
- Stereo Pair
- Updating the Firmware
- Option Settings
- Troubleshooting
- Specs
- Quick Start
- Supplement for Stereo Pair
- Warranty
6
Connect the unit to the network as shown below.
y
• For details on Internet connection, refer to the owner’s manuals of your connecting devices.
• Some security software installed on your PC or the firewall settings of connecting devices (such as a router) may block the
access of the unit to the connecting devices or the Internet. In this case, change the setting of the security software or
connecting devices.
• If you connect the unit to the network with a network cable, connect with a commercially available STP (shielded twisted
pair) network cable (straight, CAT-5 or higher).
• Using the MusicCast CONTROLLER app, make sure that the unit and other connecting devices are connected to the same
router (☞ P.7).
CONNECTING TO THE NETWORK
LAN
WAN
Internet
Modem
Wireless
router
This unit
Tablet
Smartphone
PC
NAS
(Network attached storage)
Network cable
Network cable
Wired or wireless