OWNER'S MANUAL ABL
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture and cold. For proper ventilation, allow the following minimum clearances.
◆ Special Instructions for U.K. Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
FEATURES WX-030 Plays music files in smartphones via a network (using MusicCast CONTROLLER app, DLNA servers, Spotify), AirPlay (iPod), and Bluetooth (Bluetooth device). Also you can use your smartphone as a remote controller. Plays music from Internet radio and online streaming content. Plays music files in PCs and DLNA servers.
INTRODUCTION CONTENTS INTRODUCTION OTHER FUNCTIONS AND INFORMATION SUPPLIED ACCESSORIES .................................. 2 PART NAME .......................................................... 3 STEREO PAIR ..................................................... 12 Setting/Playing back music .............................. 12 Canceling Stereo Pair ...................................... 13 UPDATING THE FIRMWARE.............................. 14 OPTION SETTINGS............................................
PART NAME ■ Top panel 234 1 567 Bottom 8 A B (power)/CONNECT (☞ P.5) E Bluetooth indicator Lights during Bluetooth connection. Turns down the volume. C Turns up the volume. F Power indicator Lights while the unit is turned on. G Network indicator Lights while the unit is connected to the wired or wireless (Wi-Fi) network. D Plays/pauses. H Reset button (☞ P.16) Press to restart the unit. y A, B, C, D are touch sensors. They react when you touch them with your finger.
PREPARATION INSTALLATION Plug the power cable into the wall outlet after connecting all the other cables. Note Placing the unit too close to a CRT TV may impair the picture color or cause a buzzing noise. In this case, move the unit at least 20 cm (8") away from the TV. This is not an issue with LCD and plasma TVs. Install in a stable place, being careful of the following points: • Do not place on top of steel or other metal plates. • Do not cover with a cloth, etc.
TURNING ON THE POWER ■ To mount the unit to a wall mount hanger The unit can be mounted to the wall using a commerciallyavailable wall mount hanger. Use the wall mount hanger hole on the rear panel to mount. y Use a wall mount hanger that is compatible for a unified coarse screw, such as those used for the tripod stand of a camera. Rear panel 121.5 mm (4-3/4") WX-030 156.5 mm (6-1/8") 26 mm (1") WX-030 2.2 kg (4.9 lbs.) 243 mm (9-5/8") Specification of mounting screw: UNC 1/4-20 Diameter 6.
CONNECTING TO THE NETWORK Connect the unit to the network as shown below. Tablet This unit Mobile device PC LAN Network cable Broadband router Internet Modem WAN Network attached storage (NAS) y • For details on Internet connection, refer to the owner’s manuals of your connecting devices. • Some security software installed on your PC or the firewall settings of connecting devices (such as a router) may block the access of the unit to the connecting devices or the Internet.
HOME AUDIO NETWORK WITH MusicCast MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use app. For more details and a lineup of MusicCast compatible products, visit our website. http://www.yamaha.
HOME AUDIO NETWORK WITH MusicCast ■ Setting of the devices and playback Create the following network (MusicCast Network) using the MusicCast CONTROLLER app. WX-030 wireless router y If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect another MusicCast support device to the router with a network cable to extend the range (Extend mode).
LISTENING TO THE MUSIC LISTENING TO THE INTERNET RADIO You can listen to world-wide radio stations via Internet. After connecting the unit to the network, use the MusicCast CONTROLLER app (☞ P.7) to play the radio. y You can use the advanced feature of vTuner (such as adding a new station to the list) by accessing the following website with the web browser on your PC. http://yradio.vtuner.com/ - Before registering the Internet radio station, play any Internet radio station with this unit.
PLAYING BACK MUSIC WITH AirPlay ◆ A B C For Windows Media Player 11 Start the Windows Media Player 11 on your PC. Select “Library” then “Media Sharing.” Check the “Share my media to” box, select the “WX-030” icon, and click “Allow.” y The names on the list are device names (Room names). You can set Room names on “ Room name/Information” in the MusicCast CONTROLLER app (☞ P.7). If the Room name is not set, the Room name is “WX-030 ***.” (*** is an arbitrary number.) D Click “OK” to exit.
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device. Pairing this unit with your Bluetooth device ■ Pairing (Registration) 1 (power)/CONNECT A Turn on the unit. The power indicator lights. B On your connecting device (mobile device), set Bluetooth to on.
OTHER FUNCTIONS AND INFORMATION STEREO PAIR You can use two WX-030 units to reproduce stereo sound by setting each speaker as the right or left speaker. Set the left and right speakers separately by following the steps below. Note Left speaker WX-030 WX-030 Right speaker • To use the Stereo Pair function, you need two WX-030. • Before setting the Stereo Pair, update the dedicated app “MusicCast CONTROLLER” and the firmware of both units to the latest version (☞ P.7).
STEREO PAIR D Use the dedicated app “MusicCast CONTROLLER” to play back. y • You can check which speaker is the left or right speaker with the dedicated app “MusicCast CONTROLLER” (Indicators light as or of the table). • In Stereo Pair mode, you can operate one speaker to simultaneously turn off both speakers or adjust the volume of both speakers. • If about five minutes passes while the unit cannot find the other speaker to connect to, the pairing standby mode will be cancelled automatically.
UPDATING THE FIRMWARE You can update the firmware only when the unit is connected to the Internet (☞ P.6). Follow the instructions in the MusicCast CONTROLLER app to update. The power indicator flashes quickly while the firmware is being updated. Updating completed: The unit restarts. Updating failed: All the indicators flash. Unplug the power cable from the wall outlet and plug it in after 30 seconds or more, then update the firmware again.
ADDITIONAL INFORMATION ■ DLNA ■ Internet radio What types of servers can I use to browse or play back music files with DLNA? Can I add other Internet radio stations to the list? Use a DLNA-compatible server, such as one of the following devices.
TROUBLESHOOTING Refer to the table below when the unit does not function properly. If your problem is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Cause Solution The unit is not turned on, or the touch sensors do not react.
TROUBLESHOOTING Problem The network feature does not function. Cause Solution The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on the router. The unit is starting up. (The unit becomes operative about 10 seconds after plugging the power cable into the wall outlet.) Use the network function after the unit has completely started up. Playback stops (songs cannot be There are unsupported files in the server. played back continuously).
TROUBLESHOOTING Bluetooth Problem Cause The connecting device does not support Cannot make this unit paired with the connecting A2DP. The passkey of the devices, such as a device. Bluetooth adaptor, that you want to pair with this unit is other than “0000.” This unit and the connecting device are too far apart. There is a device (microwave oven, wireless LAN, etc.) that outputs signals in the 2.4 GHz frequency band nearby. The unit is in standby mode. Another Bluetooth device is connected.
SUPPORTED DEVICES/MEDIA AND FILE FORMATS ■ File format This unit supports the following formats. File WAV (PCM format only) Sampling frequency (kHz) Quantization bitrate (bit) Bitrate The number of channels Gapless playback 16/24 — 2 ✔ 32/44.1/48/88.2/96/ 176.4/192 MP3 32/44.1/48 — ~320kbps 2 — WMA 32/44.1/48 — ~320kbps 2 — MPEG-4 AAC 32/44.1/48 — ~320kbps 2 — FLAC 32/44.1/48/88.2/96/ 176.4/192 16/24 — 2 ✔ ALAC 32/44.1/48/88.2/96 16/24 — 2 ✔ AIFF 32/44.1/48/88.
SPECIFICATIONS ■ PLAYER Network • • • • Ethernet interface.................................... 100Base-TX/10Base-T Internet radio........................................vTuner service supported PC client function ....DLNA Ver. 1.5 (DMR function) supported Supported file format ............................................WAV, FLAC, AIFF (192KHz/24bit) ..................................................................ALAC (96KHz/24bit) ......................................
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.