Operation Manual

1
2
3
4
5
6
7
8
9
3-12
EAU1044E
INSTRUMENT AND CONTROL FUNCTIONS
EWA10241
WARNING
The vehicle must not be ridden with
the sidestand down, or if the sid-
estand cannot be properly moved
up (or does not stay up), otherwise
the sidestand could contact the
ground and distract the operator,
resulting in a possible loss of con-
trol. Yamaha’s ignition circuit cut-
off system has been designed to
assist the operator in fulfilling the
responsibility of raising the sides-
tand before starting off. Therefore,
check this system regularly and
have a Yamaha dealer repair it if it
does not function properly.
EAUT1095
Ignition circuit cut-off system
Check the operation of the sidestand
switch according to the following pro-
cedure.
Turn the key on.
Put the sidestand up.
Push the start switch while applying
either of the brake levers. The engine will
start.
Put the sidestand down.
If the engine stalls:
The sidestand switch is OK.
WARNING
● The vehicle must be placed on
the centerstand during this in-
spection.
● If a malfunction is noted, have
a Yamaha dealer check the
system before riding.
4P9-F8199-E5_CS.indd 3-124P9-F8199-E5_CS.indd 3-12 2011/09/06 14:18:402011/09/06 14:18:40
Process BlackProcess Black