User Manual

En 13
EN
Specifications
The specifications of the unit are as follows.
Input jacks
Analog Audio
• Stereo Audio (RCA) x 4
Output jacks
Analog Audio
• Speaker Out x 4 (L/R)
• Stereo Audio (RCA) x 4
Other jacks
Trigger In x 4
Trigger Out x 4
Remote In x 1
Remote Out x 1
Audio Section
Rated Output Power
• (2-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 )
90/50 W
• (2-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 ) 100 W
• (1-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 )
100/50 W
• (1-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 ) 200 W
Dynamic Power
• (2-channel driven, 20 Hz to 20 kHz, 0.08% THD,
20ms Burst, NORMAL, 4/8 ) 80/40 W
• (2-channel driven, 20 Hz to 20 kHz, 0.08% THD,
20ms Burst, BRIDGE, 8 ) 150 W
• (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst,
NORMAL, 4/8 ) 100/50 W
• (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst,
BRIDGE, 8 ) 200 W
• (All channel driven, 1 kHz, 0.9% THD, 20ms Burst,
NORMAL(8-ch), 4/8 ) 80/50 W
• (All channel driven, 1 kHz, 0.9% THD, 20ms Burst,
BRIDGE(4-ch), 8 ) 170 W
Maximum Effective Output Power (JEITA)
• (1-channel driven, 1 kHz, 10% THD, NORMAL, 4/8 )
130/65 W
• (1-channel driven, 1 kHz, 10% THD, BRIDGE 8 ) 260 W
Total Harmonic Distortion (THD)
• (20 Hz to 20 kHz, SP OUT, 25 W, 8 ) 0.04% THD
Frequency Response (+0/
- 3 dB)
• SP OUT (AMP IN) 5 Hz to 40 kHz
Signal to Noise Ratio (IHF-A)
• SP OUT (AMP IN) 108 dB
Maximum Input Signal
• AMP IN (1 kHz, 0.9% THD) 1.0 V
Gain
• SP OUT (1 V INPUT) 25.8 dB
Input Sensitivity
• 1 W power (1 W/8  output) 150 mV
• MAX power (50 W/8  output) 1.0 V
General
Power Supply
• [U.S.A. model] AC 120 V, 60 Hz
• [Other models] AC 220 to 240 V, 50/60 Hz
Power Consumption 130 W
• Amp1 - Amp4 On, No Signal Condition 32 W
• Amp1 - Amp4 Off, Audio Sense On, Audio Sense Mode Active
14.8 W
Standby Power Consumption
• Audio Sense Off 0.3 W
• Audio Sense On, Audio Sense Mode Standby 0.5 W
Dimensions (W x H x D)
437 x 46 x 443 mm (17-1/4” x 1-3/4” x 17-3/8”)
Weight 6.0 kg (13.2 lbs)
SPECIFICATIONS