User Manual
4 En
Front panel
a MAIN STATUS indicator
Indicates the unit status depending on its color and whether it is
lit or flashing.
Note
• When flashing green or red, the corresponding ZONE’s
STATUS indicator also flashes.
• The Cut / Fade function means that the audio signals that are
input to CUT IN : IN (SENSING) jacks "cut in" or fade in the
playback in each ZONE.
b RESET key
Resets the unit. The unit is restarted forcibly by holding down
RESET key for over 10 seconds.
c STATUS indicators
Indicate the ZONE1 - ZONE4 status depending on whether they
are lit or flashing.
d STANDBY keys
Turn ZONE1 - ZONE4 to on / standby. The unit consumes a small
power even in standby mode. The unit’s standby power
consumption depends on the standby configuration.
e CONNECT keys
Add ZONE1 - ZONE4 to the MusicCast network using the
MusicCast CONTROLLER app. The 4 ZONEs are independent
of each other, so make sure to connect the mobile device with the
MusicCast CONTROLLER app installed to the operating ZONE
individually.
f USB jacks
• Connection: USB Type-A
• File format system: FAT16, FAT32
• Voltage / current supply capacity: 5 V / 0.5 A
For connecting a USB storage device. You can play back music
files stored on a USB storage device when you select “USB” as
the input source.
PART NAMES AND FUNCTIONS
ab c
d
ee f
– Unlit Standby
White Lit Power on
Green Flashing Setting up the MusicCast
connection
Dark red Lit Network Standby or ready for
Cut / Fade function
Red Lit or
flashing
Error occurred
– Unlit Standby
White Lit Power on
Flashing Setting volume or selecting input